Most boys try not to talk about the size of their penis as it is a painful topic for them. Some boys, even of normal size, would like to change the length of their penis. Today, this can be done in a variety of ways, even without surgery. For example, a vacuum pump for men will help lengthen the penis. Before you buy this device, you need to know how to properly use the penis enlargement pump.
Is it possible to enlarge an item with a pump
First you need to find out if the vacuum pump helps with an erection and if it is realistic to enlarge the penis with a pump, as some doubt the effectiveness of this method.
Until recently, such a vacuum pump was only used to improve erections. In fact, during the use of the penis pump, the blood flow increased several times, due to which the erection increased. Over time, boys who improved their erections with it noticed that after using this device, the size of the penis became larger. Therefore, you should not think about whether it is possible to enlarge the penis with a vacuum pump, as this has been proven for a long time.
Many people advise using just such a device to change the size of the penis at home.
Due to the constant stimulation of blood circulation, the epithelial tissue is constantly growing and this lengthens the penis.
Most boys who use this device regularly have been shown to perform well. Only a month later, the penis enlargement pump helped make it two and a half times thicker. The length also increases, but much more slowly than the width.
How the penis enlargement pump works
If you regularly use a vacuum pump to enlarge your penis, blood flow to the phallic tissue will increase. Thanks to this, the penis lengthens and thickens. It is no secret that inside the organ there is tissue consisting of blood vessels. If the blood circulation increases, then the gradual expansion of these cells begins.
The vacuum created by the device systematically increases blood flow and fills the spongy tissue with it. This leads to improved potency, stretching of the skin of the genital organ and its expansion.
Varieties
Most penis enlargement pumps do not differ in structure. Externally, they look like an ordinary plastic flask on which a ruler is applied. Penis enlargement pumps are sold with a bulb, which is needed to create pressure in the bulb, and with a special seal.
However, some models may be equipped with an exhaust valve, pressure gauge or a special pressure control button.
There are several types of these devices.
Manual
Many men choose to use a hand pump to improve their masculine dignity. This model has a built-in special piston that allows you to completely remove air from the flask. Such pumps are the cheapest and are therefore used more often than others.
Automatic
The automatic pump allows you to enlarge the penis much faster than the manual one. It is connected to an electric pump powered by batteries. One does not have to make any effort to use this model. All you have to do is adjust the pressure and use a vacuum electric pump.
Aquatic
Not every man uses water pumps to enlarge his penis, as these models have appeared relatively recently. In this case, water is added to the container. Such devices are more effective and have virtually no contraindications. Also, the advantages of water models include their service life.
It is impossible to unambiguously determine which penis enlargement hydraulic pump is the best, as all of the above models have their own differences.
Selection Functions
Before you do penis enlargement with a vacuum pump, you need to understand how to choose the right device. When choosing, you should adhere to the following recommendations:
- the length of the bulb of the penis should be 3-4 cm longer than the erect phallus;
- the device should be 2-3 cm wider than the circumference of the penis during erection;
- beginners are advised to use a device equipped with a pear-shaped oxygen pump;
- The penis enlargement vacuum pump must be made of a reliable material that can achieve a complete seal.
You should also consider how much the purchased device costs. If there are no financial constraints, you can buy an automatic model immediately.
How to make a pump yourself
If you wish, you can make a penis pump with your own hands. The male home pump must consist of the following elements:
- Flask. The element is designed to fit the penis.
- Pump. Mandatory element used to pump oxygen.
- Tube. In most models it is used to connect a pump to a flask. Sometimes, however, you can find models without pipes. In this case, the construction is monolithic and the pump is attached directly to the flask itself, without the use of auxiliary elements.
To make such a potency enhancer yourself, you must follow these instructions:
- It is recommended to use a balloon to create a flask. First, a special hole is made in it, into which the penis will be inserted. It should be without slits, so make sure it is perfectly flat.
- Once you're done with the first hole, you need to move on to the next one. It must be perpendicular to the walls. This hole is designed to mount the pipe that will be connected to the pump. The width of the hole is determined based on the dimensions of the connected hose.
- A pipe is connected to the created hole. For this it is recommended to use a hose with high density and thick walls. A hose made of too thin a material will block the air in the bends, which may adversely affect the operation of the device.
- A paper funnel should be placed at the bottom of the container, which will be used to apply the sealant in the future. The thickness of the funnel should be equal to the width of the erect penis.
- When the seal is completely dry, you can start connecting the pump. For this you can use a small aquarium pump or a simple rubber bulb.
This device is enough to find out if the pump is enlarging the penis. However, for better performance, it is still recommended to buy high quality vacuum pumps.
How to use a penis enlargement pump
Not everyone knows how to use a penis enlargement pump. For proper use of a vacuum pump for men you need instructions that will describe the characteristics of using this device.
Before using the penis enlargement device, I lubricate the plastic flask with a little grease. In this case, I use only grease-free lubricants so as not to accidentally damage the flask. When the bulb is completely lubricated, the penis can be placed in it. In this case, it must be positioned so that it adheres tightly to the walls. Then the air begins to be pumped and this leads to the fact that blood flow gradually begins to increase.
During the elongation of the penis with a pump, it is necessary to fix the flask with one hand and to pump oxygen with the other with the help of a pear. It is also necessary to completely cover the hole on the flask, which helps to create full density. After a few minutes you may notice a strong reddening of the enlarged penis.
Redness indicates that further increase in erection may be harmful and should therefore let air into the flask.
When the erection is slightly weakened, the procedure should be repeated. The duration of the device is 20-30 minutes. This device should be used to treat impotence every 2-3 days. However, it is recommended to use the pump daily during the first week, especially before sex. In fact, for some men, it is important to increase the length of their penis just before intercourse. When the penis is elongated, a special erection ring can be used after the pump. It is fixed at the base of the penis and does not allow the erection to disappear quickly.
Contraindications
Before enlarging your penis with a pump, you need to know the main contraindications. This penis enlargement machine should not be used:
- people with infectious urethritis and inflammation;
- men with thrombosis.
It is therefore recommended that you consult an andrologist so that he can perform all the necessary tests and make a conclusion about the need for penis enlargement with a pump.
Conclusion
Many boys wonder if it is possible to enlarge their penis with a pump. To understand this, you need to familiarize yourself with the principle of operation of this device and communicate with the people who have used it.